18 months from Date of Manufacture.

The stronger the sunlight the quicker the cure. Generally, in normal sunshine, material will cure in 30 minutes to one hour. Curing can also take place in cloudy conditions, as UV is always present in the atmosphere.

Again the stronger the UV light, the quicker the cure. Material will cure anywhere between 10 and 30 minutes depending on the power of the UV light.

Quick Patch will bond powerfully to most clean and dry surfaces. However it is not recommended to use the Quick Patch on Polypropylene or bituminous surfaces.

Quick Patch can be cut to any size or shape either using scissors or a knife.

Yes. It is recommended any balance material be replaced in the original packaging for storage purposes.

As long as care has been taken to protect uncured material when the pouch has been opened, normal shelf life can be achieved when replacing unused material back in the pouch.

Yes. Cured material can be sanded, drilled and painted after removing the top clear film.

It is not recommended to use the patch on wet surfaces.

Surfaces only need to be clean, dry and free from any loose contaminants.

Fully cured material can withstand temperatures ranging from minus 30° F up to 356° F.

Standard sizes are 3” x 6”, 6” x 9” and 9” x 12”.

Yes. Multiple layers can be applied however, we would not recommend anymore than five layers being applied at any one time. When adding layers, additional curing time should be allowed in order for all layers to fully cure.

Quick Patch is a non-hazardous material however, it is recommended anyone with sensitive skin should wear appropriate protective gloves when handling the material. Full Health & Safety information can be found on the Quick Patch SDS ( Safety Data Sheets).